November 27 2019
I am very sad to report that I can no longer recommend the SaberStrip v2.0. I have attempted to contact Scott the owner of SaberStrip to no avail. Not even a peep. My feeling is ignoring an email or Instagram message is not acceptable or polite. A visitor to this site had written to me since he had ordered a v1.0 SS and never heard back…until he asked for a refund. That was promptly answered.
Sad since it’s a great modifier, but when something cannot be purchased it becomes vaporware. When I find an alternative I will post it to my blog.
January 13 2019
I continue to be absolutely amazed at the flexibility and versatility of the v2.0 Saberstrips. As of this writing I do know that Scott has not yet offered these for sale to the general public. The reason I continue to post my findings here is in hopes of motivating some of you to contact him to ‘hurry him along‘ in the sale of these modifiers. In addition to dance, their form factor and quality of light make them invaluable in my tool kit. Seriously – combined with the AD200 strobes I feel they are a revolution in modifiers. Here are just a few of the in studio dance imagery created using these lights.
Update November 19 2018
I continue to be so impressed how using two v2.0 Saberstrips can produce the light I so love which could only be created with a ring light. But the huge difference is since the lights are NOT attached to the camera, I can use a long lens, yet keep the lighting near the talent. This was taken with a Canon EF 85mm f1.2 lens. The versatility of these modifiers is incredible.
Not to mention my use of them in dance imagery creation.
Several of you have written to me asking when Scott will release these modifiers. I highly suggest you write to him on his website to ask. I continue to encourage him to release these modifiers.
Update October 14 2018
I recently conducted a studio dance session using three Saberstrip v2.0s combined with a Mole Richardson Fresnel spotlight I have converted to a strobe. I continue to be so amazed and impressed by the versatility and light quality of the second generation Saberstrips. As I’ve stated before I’m just scratching the surface of what can be accomplished with these remarkable lighting tools.
Each of these images were created using a combination of Fresnel/Saberstrip light modifiers.
Update September 17 2018
Yesterday I conducted an all day dance session. I found that utilizing three v2.0 Saberstrips with 3 Flashpoint AD200s produced remarkable light for studio dance. Rim lights, using two Saberstrips and one overhead light produced the exact mood I was trying to achieve. Seriously this combination is incredible for my dance work.
Update August 1 2018
I recently used the v2 Saberstrips in on location sessions in Seattle. Man I could not have done it without them! You can read about it here.
I have also completed a publicity shoot using two Saberstrips for a West Side Story publicity image as shown below.
Like most other folks and way before I began shooting as a full time pro, I had a day job. It was during this time I discovered a very unique light modifier called the SaberStrip. What was so intriguing to me is its shape and the quality of light it produces. I was a bit suspicious when I first received my Strip because it seemed like ‘just a high quality shipping tube’ with some rip stop nylon as the modifier’s cover. Also this was back in the day when I was almost exclusively using speed lights, but had two PCB Einsteins for my ‘studio work.’ And this was well before the advent of built in radio receivers in speed lights, so I had to use a pigtail cable connected to my speed light inside the tube to attach it to the Phottix Transmission receiver I was using at the time. A bit of a hassle, but it was the only thing that existed at the time, which was ‘high tech’ for that era.
Although I loved the quality of light it produced, for me the power or rather lack of power of the speed light relegated the Strip to my closet. I tried to fabricate my own ‘Strip’ for my Einsteins, but found out it was not as easy as I thought. So I basically gave up and moved on to other things.
In 2013 I decided to create a series of images about the hands of artists which included both performing as well as creating artists. Since I wanted to shoot the talent in their natural environments I found that all of my ‘normal’ modifiers would not work well due to space. In some cases I had literally 10 inches or less to place a light and modifier to light the talent! So as I was rummaging through my gear closet I happened upon my Strip that I had doomed to its lonely existence in the back of my modifier closet. Eureka! That’s the perfect tool for this job and since most of the venues I was shooting in were very small I would not need a ton of light power so my speed light would do just fine.
By happenstance the Director of the Peninsula Museum of Art saw one of my images and asked to see the rest. She then asked if I’d consider having a solo exhibit at the museum the following year. I politely told her no and when she inquired as to the reason for my decision I simply replied “I don’t think my work is good enough for a museum and I think it would be very narcissist to do that.” She simply smiled and said OK. Later one of the artist I know mentioned that he had heard I was offered a solo museum exhibit but turned it down. Werner asked me if I ever go to museum exhibits to which I responded “Why yes, I love going, why?” His response was typical Werner, direct and to the point; “Well quit being so fucking selfish and let others enjoy and be inspired by what you’ve created Mark!” I’m seldom if ever at a loss for words but I had nothing to say. So I contacted the Director and agreed to display my work which I titled “29 Hands, 15 Artists.” With the exception of one of the images, all were lit with my Strip and a speed light.
Fast forward to today, 2018 and I was made aware of SaberStrip’s v2.0 version of the Strip which accepts an eVOLV200! In March 2018 I was shipped two advanced copies of the modifiers to test to see if I could offer any feedback. Here’s what I’ve found so far:
The 200 is inserted into the bottom of the modifier through what I call the “Tractor Tire” the designer fabricated it to attach the 200. I believe his design is to offer strength to the mount. I simply like to think he liked Tonka Trucks as a kid! The knurled knob on the left in this photo is the turning knob that screws the 200 in place. The other nice design feature is you can eject the battery of the 200 without removing it from the modifier, a very thoughtful design element.
Sorry for the shitty camera phone blurry image. The red thing you see at the top of this shot indicates that the screw is NOT attached to the 200 which is a very nice feature. One of the things that I found to be a design issue, it’s very easy to over tighten the screw. There’s no need to do so because it makes it VERY difficult to unscrew the unit from the mount. I learned the hard way and had to use a screwdriver and hammer to loosen the screw.
It’s also not possible to let the eVOLV slide down into the tube because there are ribs on the interior which keeps the strobe from sliding too far into the unit. I believe he may have other plan since those interior ribs seem to be reinforcements for four exterior metal nipples. Barn door or grid accessories for the future? Perhaps.
I painted a directional arrow on the housing to indicate which direction to loosen the mounting screw.
What the interior looks like in the v2.0 Strip. You can see the reinforcing supports which prevent the eVOLV from sliding too far into the tube.
Although most people will not have to do this, I ground down the mounting peg that is cast into the housing. This allows me to easily insert the peg into female mounts I use to place the modifier in either a vertical or horizontal position. Although the v2.0 Strip works extremely well in stands which offer the mounting peg to be in a vertical or horizontal position, not all light stands offer that option. When I travel to other cities I often have to rent stands and not all rental houses have adjustable spigot locations on their stands.
This is why I needed to shave down the diameter of the molded peg. It would not fit as cast. I find these female spigots invaluable in my gear bag.
I plan to use these to mimic a ‘ring light’ because I can now leave the modifier and strobe very close to the talent and back away to shoot with a long lens. Not possible with traditional ring lights. Also since the eVOLVS have modeling lights in the Fresnel head I now have a modeling light in this configuration. Sure, not brightest modeling light, but way better than none.
Canon 1DXII EF135 lens ISO 100 both AD200s set at 1/8 power. 1/5000th f2.0
In those instances where I want to place the v2.0 Strip close to the ground I will simply use a Godox S bracket as a base. This configuration will be perfect for dance shoots as fill lights or anytime you wish to place the units very low onto a flat surface.
|SaberStrip v1.0||SaberStrip v2.0||w/2 eVOLVS and SS|
|Light||Flashpoint Zoom R2||Evolv200|
|Flash weight||17 oz||31 oz|
|Distance to Sekonic||5 feet||5 feet|
|Time to Recycle||6.8 sec||1.57 sec|
|Length of fabric||29″||29″|
|Width of fabric||2.25″||2.25″|
|Length of modifier||38.5″||34.75″|
|Diameter of modifier||3.5″||3.5″|
|Saberstrip Weight||19 oz||27 oz|
For me the most significant stats are the recycle time and power. It’s the very reason I stopped using my original speed light Strip, it just lacked power. And in my work a one second delay feels like 12 years. Human expressions change in a nanosecond and invariably it’s the money shot I wanted, but missed because the strobe was recycling. Two full stops and five seconds faster in recycle time makes this modifier an incredible tool.
The ‘tube’ freely rotates around the mount so it can easily and conveniently turn the fabric to any position needed. There’s also a very small 1/4 inch 20 screw hole in the ‘tractor tire’ housing. I’m not sure why the guy put one there but it’s damn convenient. I plan to place a female mounting stud in there so I can either mount the Strip with the built in male stud or a female one. It should be noted that if you place a long ¼ 20 screw into that hole it will stop the free rotation of the tube. So IF you are the anal type and want to lock down the tube’s rotation you can do that with this screw hole.
This coming weekend I have three personal project shoots and I plan to test the light quality and applications in those sessions. I’m not sure how many times the Strip v2.0 will be my key light, but now that the recycle times and the power available through this meets my needs I’m sure it will always be in my bag.
Having a stand, a strobe and a modifier all in one easy to transport package is great for run and gun shooting, especially outside in moderate to high wind. My preferred stand for these is the Neewer Light Stand, 114 inches/290 centimeters Stainless Steel Heavy Duty with 1/4-inch to 3/8-inch Universal Adapter. It has a removable spigot that can be configured for either a vertical or horizontal female mount which is perfect for the new Strips. They are well made, strong and inexpensive.
The number of ways to mount the Strip seems endless. My current favorite grip mount for the Strip is the Matthews Mini Grip Head. I modified it by drilling out one of the holes to 9/16th of an inch which fits the Strip’s 5/8th inch stud.
What I like:
- High quality Construction
- Built in male mounting stud
- Ability to rotate the modifier around two axis
- Accepts the Evolv200
- Well balanced, having the strobe at the mounting end of the modifier
- Very wind resistant
- Will fit into very tight spaces
- Male stud needs to be the 5/8th inch size standard of all spigots
- Wheel that attaches the strobe needs to have directional arrows.
- Wheel needs to prevent over tightening
During the weekend of April 21st 2018 I had my first opportunity to use the v2 Sabers in studio. I wanted to determine if paring them in a horizontal way would give me the ring light type of affect. I’ve always loved the look of a ring light shot, but have been frustrated that the distance of the light to the talent is limited by the focal length of my lens. Using my ring light further away to compress the talent’s face meant that the light is also further away, causing a harsher look. But using two Strips horizontal to the ground with the ability to adjust the distance between them allows me to leave the light source close to the talent, yet move further back to use a longer focal length. Having my cake and eating it too is wonderful!
The images below show how this worked on Jessica and I’m very happy with the results. Shot with a 135mm prime lens.
The flexibility of being able to angle the pitch of the Strips and distance between them is wonderful. More control than a ring light. As a fill/rim light I have not experienced a better modifier. Reflectors make great fill or rim light modifiers, but I have always preferred strobes for that task. It allows me finer control of my fill light.
By changing the angle of the top Strip in the image of Jess with her arm above her head I am able to cast a bit of a shadow on her eyes while filling in under her eyes to prevent shadows. That flexibility allows me to create nuance shadow/highlights with the Strips.
Here I am using the Strips as a fill and rim light. All of these images are three light shots. My 10” Fresnel is the key light, a gobo modifier is used on a light to create pattern on the background and the Strip is used as a fill/rim light.
The control of the Strip as a fill light is quite lovely and can be used as subtle or as bold as you wish. Here are two more images I created using two SS’s in parallel as a ‘ring light’ but in my view with a much better result.
Oh and large groups in moderate to strong wind? I was recently at a client to cover the high school musical awards and prior to the event kids assemble outside. It’s often a fun place to get group shots before the show. The issue is always crowded sidewalks and of course crazy high school kids. I shot this image with ONE SS and one eVOLV200 at HALF POWER.
I recently visited Luna Cycle in El Segundo to do some documentary photography of the staff. In the vast majority of cases the SS were used due to their flexibility and light quality. As in my 29 Hands Exhibit I was able to use the SS to light the talent in places where it would be almost impossible to fit a modifier in the space I had available and achieve a quality of light I wanted. Below is an example of one of the shots.
My apologies as I know you won’t be able to ‘unsee’ the image that follows, but to date it illustrates the rim lighting capabilities of the Strip. During this session I was to shoot two Drag Queens. The fella on the left is 6-1 without heels and with his 4” heels it makes him 6-5! I used the Strip as a rim light and if you notice the illumination from head to toe it’s quite remarkable. Could this be accomplished with a gridded light? Of course it could. But due to the very slim shape of the Strip it allowed me to get as close to the back drape as possible keeping spill to a minimum and certainly much less than a softbox without a grid.
Outdoors with the Strip is quite good. It is ‘almost’ impervious to wind, high wind. It is more wind resistant than my go to outdoor modifier, the PCB Omni. The disadvantage is since the Strip uses the AD200 it is a full stop less powerful than the AD600 I use with the Omni or my Aputure Fresnel head. But to circumvent that disadvantage I often use two Strips as a key light when outdoors. And in those instances where I want a very large light source I use three Strips configured in a Y shape. I find it’s the equivalent to a 45” octa with 600ws of power. Ever use something that size out in moderate or high wind? And I use all three on a single stand.
My partner recently conducted a head shot session using two of the Strips. She used one as the key and the other as a rim light. It was very windy under the concrete bridge where she was shooting and the Strips barely wobbled. The light quality is excellent and easily replicated her preferred modifier, a Glow 36” Octa. But in that kind of wind, especially the gusts that occurred an octa would have been quite the handful. She does prefer the catch light of the octa, a personal preference to which many people may agree. I happen to feel that round catch lights are the default, yet in natural light a catch light is anything but round…..
As you can see the quality of light produced by the Strip is excellent. Two lights, both Strips. One as the key light the other as a rim light.
Is it the perfect modifier? Nope, but as of right now there is no perfect modifier. Just like there’s not a perfect camera, lens or person. Is it the most versatile modifier I currently own or use? YES! For me the v2 Saber Strips are revolutionary and I have not even scratched the surface of how they can be used. Thank goodness for the AD200 lights and Scott’s development to incorporate them into the Saber Strips! Scott has mentioned that the v2 versions which use the eVOLV200s will be available in late July 2018.