web analytics
logo

Tag : Kaitlyn McDermitt

22 Sep 2016

Adorama’s Flashpoint XPLOR 600 TTL Review

UPDATE September 10 2017

I recently posted an article on my use of all Godox units in one session. The article includes the use of this product. You can view that post here.

UPDATE: July 29 2017

I have written an article about how I achieved using the Xplor/Godox 600 and 200 strobes in HSS with my Pentax 645Z. You can read that article here.

UPDATE July 17 2017

I recently wrote an article about using all of my Xplor/Godox lights in one shoot including the eVOLV200s. You can view that post here.

capture

I’m an early adopter on lighting gear. Always have been. And like all early adopters I run into the quirks and problems associated with early development of gear. I always test gear before I use it commercially, but sometimes my testing is not exhaustive enough to anticipate every situation. And as any working pro knows, something ALWAYS goes wrong on every shoot no matter how much you plan. It’s just part of the deal.

I was one of the first adopters of PCB’s Einstein 640ws strobes. Excellent t1 performance in a small package was enough for me. I’ve used Einsteins for over 7 years exclusively in studio from the time they were released. When Adorama released their Flashpoint 600ws Rovelight I was intrigued. Rather than having to haul an Einstein and a Vagabond II, the CyberSync triggers on location the Rovelights have a built in battery and receiver. So I bought several, tested them and took them out on a commercial shoot. I ran into issues during that shoot with the trigger’s lack of range. I wrote an extensive evaluation of them and complained with others to Adorama. An friend of mine (NASA!) who is an electrical engineer dismantled the transmitter and showed me the issue which caused the poor range. In the end I sadly returned all of my Rovelights to Adorama. Subsequent to the trigger issues Adorama had them redesigned and developed a RMA program to replace the original triggers to early adopters. As a working pro warranties and customer service are key. It’s one of the reasons I stayed with PCB for so long, excellent customer service. The fact that Adorama took the initiative to replace triggers is one of the reasons I respect them. I respect those that DO much more than those that SAY.

(more…)

20 Sep 2016

It’s Personal

This post is about the people rather than the picture. Sure I’m a professional photographer and make my entire living shooting for clients, so of course I have to produce imagery! But the primary reason I chose to do this for a living is to meet interesting and authentic people.

Unlike work for clients, my personal work gives me complete freedom to art direct and create imagery that fits my vision. When shooting for clients those images must fit what they have as a vision for their product. My ability to season the mood of their images depends on each individual client. Some allow me more input than others, but by continuing to do personal projects it keeps me fresh with new ideas and concepts. After 39 years of being a ‘corporate suit’ this is the vocation I chose to do for the remainder of my working days. So I keep my creative mind fresh by continuing to create personal work. The day I find that the artistic satisfaction has left me and it’s ‘just a job’ I just won’t do this anymore. Clients automatically benefit because the ideas I try in my personal work often get used in my professional work. A win/win if you ask me….

(more…)

17 Mar 2016

Review – CononMark  Indirect Deep Parabolic Softbox 120cm

UPDATE August 21 2017

I have been using the CononMark 120 for a little over a year now in many of my commercial shoots. I have been very pleased with the light it produces along with its durability. Keep in mind that I don’t leave any of my modifiers constantly assembled since I travel TO client shoots in different states and either haul or rent gear. The one small gripe I have with the CononMark is the rod ends which go into the actual modifier can come out of their pockets so I have to check when assembling if all are in place. Other manufacturers like Cheetahstand, Parabolix and Westcott have a better rod retention systems. I have recently written my thoughts about the Parabolix 35D where I also speak about the CononMark. You will read loads of forums about whether a modifier is actually ‘parabolic’ in shape. I would advise you NOT to place an undo amount of credibility on the theory of a modifier being an exact parabola. The shape of any modifier does have an influence on the light BUT there are TONS of other factors that come into play. Distance from talent, tension of the fabric, texture of the fabric, depth of the strobe in the modifier, on and on and on and on. What you will find is almost all of the trolls touting the EXACT nature of a modifier’s parabolic shape seldom and more often NEVER display their work. How can anyone decide if any tool is correct for their own uses based solely on theory? Photography is totally subjective. When you buy a car listed at 240 horsepower, do you take it to an independent dyno lab to have it actually measure the output at the rear wheels for horsepower? Does it really matter that much or does it simply stroke your ego to say “My car has 240 HP!” And even if it DOES have 240 HP that doesn’t mean shit unless you know how to drive and USE that power. 

My point is if possible rent or borrow gear you’re thinking about buying. Try it, see how it works for YOU and YOUR client base. What works for me may not work for you and vice versa. But one thing is certain, those who simply spew out statistics and theoretical bull shit are never going to help anyone other than their own need to ‘be right.’ They are the ones who carry a print out of a Histogram instead of  the photo to show “How they achieved a perfect histogram in the photo.”

UPDATE 10-18-16

Here are two images taken with the CononMark as the key light.

1m2_9016-edit 1m2_8824-edit

UPDATE 10-3-16

You can see some of the results from a recent studio dance session using the CononMark here.

UPDATE 3-1-16

CononMark was used as the key light in this studio ballet session. Strobe was the Godox AD600 using a H600 remote head.

01dx6655

BTS shot. Dancers l-r; Emily Dixon, Christy Martin, Natalie Anton, Kaitlyn McDermitt.

mkitaoka-160518-6523-edit

Dancer: Emily Dixon Colorado Ballet

mkitaoka-160518-6535-edit-edit-edit

Dancer: Kaitlyn McDermitt Avant Chamber Ballet

mkitaoka-160518-6566-edit

Dancer: Natalie Anton Avant Chamber Ballet

(more…)

26 Jul 2015

On Location with Avant Chamber Ballet

In May 2015 I was asked to photograph the Avant Chamber Ballet in Dallas, TX. ACB is the only truly Dallas based chamber ballet. Their Artistic Director, Katie Cooper resides in Dallas and has turned the ballet community on its ear with her innovative and critically acclaimed ballet creations. Katie Puder (Cooper) danced for years with Arlington’s well-respected Metropolitan Classical Ballet. One of the many aspects which sets ACB above other dance companies is their use of live world class orchestra musicians in their performances. Many are working musicians with the Dallas Symphony Orchestra, which is a double plus. We work regularly with them on both production and publicity imagery for their marketing campaigns.

MKitaoka_150601_9614-Edit-Edit

(more…)